CBB65A 35uF 300V S3, Heavy-Load Explosion-Proof Run Capacitor with 35uF Single Section

Home / Products / CBB65 Explosion-Proof Capacitor / Lead / CBB65A 35uF 300V S3, Heavy-Load Explosion-Proof Run Capacitor with 35uF Single Section

Lead

CBB65A 35uF 300V S3, Heavy-Load Explosion-Proof Run Capacitor with 35uF Single Section

CBB65A 35uF 300V S3, Heavy-Load Explosion-Proof Run Capacitor with 35uF Single Section: an explosion-proof run capacitor with wire leads, delivering a large 35uF value at a 300V rating. It is aimed at motors with heavier running loads where small-value capacitors cannot provide enough phase shift.

Key Features:
• A large 35uF value at a 300V rating for heavier single-phase motor loads.
• Impact current resistance helps the part survive repeated hard starts.
• A self-repairing metallized layer keeps the capacitor working after occasional overvoltage events.
• Minimal self-heating during long operation protects both the capacitor and nearby motor windings.
• Safety-protected construction gives added assurance in appliances installed in homes and light commercial sites.
• It withstands brief overloads without a sudden loss of capacitance.

Technical Specifications:

• Model: CBB65A; Capacitance: 35uF; Rated voltage: 300V; Safety class: S3
• Construction: explosion-proof body with wire leads
• Dimensions and lead specifications can be confirmed against your sample.

Typical Applications:
• Pump housings where a high-capacitance run capacitor is specified.
• Compressor-area equipment with single-phase motors.
• Heavy loads where a small capacitor would leave the motor under-powered.

Selection and Replacement Tips:
• Ensure your equipment is designed for a 300V capacitor before replacing it.
• Always compare capacitance (uF), rated voltage (V) and terminal type with the original part.

Why Buy from Cixi Riyi:

• Direct from the manufacturer: Cixi Riyi Capacitor Factory has produced AC motor capacitors since 1997.
• Export experience: our capacitors ship to dozens of countries, including the United States, Indonesia, the Philippines, Turkey and Egypt.

INQUIRE
PRODUCT DESCRIPTION CONTACT US
Product Parameters:

Technical parameter

Rated Voltage

 200VA~500VAC

Rated Frequency

 50/60Hz

Capacitance Range

 1~120μF

Capacitance Tolerance

 ±5%

Tangent of loss angle

 tanδ≤0.2% (20℃,100Hz)

Standing Voltage

 

Between Terminals

 2.0Un/2s( No flashover or permanent breakdown)

Terminals to case

 ≥2100VAC/2s(No dielectric breakdown or flashover)

Highest allowable voltage

 1.1times of rated voltage。

Maximum allowable circuit

 1.3times of rated circuit

Class of safety protection

 S2  、S3

Executing Standards

 IEC60252、EN60252、GB/T 3667.1、UL810

PARTNER WITH US
  • Required fields are marked *.
    We will send you quotes and recent promotions. We value your privacy and will not share your information.